english made ford 3000

[whodat526]

post a pic of the machine front and side

post the number on the trans bellhousings.. there will be 2-3 rows of stamped numbers.

something don't add up here.

the 3 cyl family of similar engines should have the dipstick all on the same side..

soundguy

thats what i thought since all the castings was the same

 

[Soundguy]

message was intended for the OP.. so we can help ID his machine and see why parts are an issue.

the basildon parts shouldn't be that much different for the basic chassie..

soundguy

 

[Soundguy]

thats what i thought since all the castings was the same

that's what I'm thnking.

my 3000 and 4600 fall into this category.. and thats quite a year spread.. it.. 65-79 on that smae basic 3 cyl block.

soundguy

 

[RickB]

The only thing that having the dipstick on the other side of the block tells me is the engine is a lot newer then the rest of the tractor. Doesn't matter where the final assembly was done, ALL '65 and up Ford engines were built in Basildon and were identical for a given timeframe.

Original generators were all Lucas regardles of origin. My B-prefix 4000 has the same generator & regulator as any C-prefix Thousand series.

 

[Soundguy]

would the dipstick on the other side indicate somehting like a farmtrack / indian replacement engine?

or somehting from the 30 series perhaps?

soundguy

 

[whodat526]

30 series or a bsd replacement engine i believe

 

[dcampbell]

Here are the requested id numbers. Thanks everyone for the help! F295 A110-086

 

[dcampbell]

Upon further investigation, another set of numbers was located above the posted numbers. They are...5 F 14 C. Thanks.

 

[Soundguy]

replied via email before I saw this.

 

[Wildcard]

my right side floor board is different .Local dealer can't help.