10' heavyduty Shedder/mower
- Thread starter misty
- Start date
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
probbaly need a lil more info.
Are you trying to say that the pto shaft turns, but the input shaft to the mower does not?
if so, look for a hole for a shear pin, or if it has a slip clutch, then a locking pin.
if this is not what you were talking about, post back.
PS.. welcome to TBN.
soundguy
Are you trying to say that the pto shaft turns, but the input shaft to the mower does not?
if so, look for a hole for a shear pin, or if it has a slip clutch, then a locking pin.
if this is not what you were talking about, post back.
PS.. welcome to TBN.
soundguy
Dead Horse
Platinum Member
Or you broke a spindle shaft in the gear box...
Let us have make and model and a bit more description of what is going on.....
Let us have make and model and a bit more description of what is going on.....
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
if he see's a visible part turning on the outter, and an inner part not turning.. that seems to me the input shaft, not the 'invisible' spindle shaft.. but yeah it's all a guess without a pic.... .. a picture and some line drawings / markup would be more clear.. or a look at the parts listing and call out the problem areas by name.. etc.
soundguy