Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Sep 2010
    Posts
    2
    Tractor
    long 445

    Default Yanmar PTO Tiller

    I have an old tiller and the bearing that holds the shaft or spindle on broke violently. I had to take the shaft off and all of the Tines off as well, then take the gear box apart because the chain inside broke a link. The bolts were old and corroded so i will need new ones as well as a new gasket, bearing and a chain link to fix the chain.
    I believe that this tiller is a RS 1303 model. It is a Yanmar for sure, but i can't tell what model it is. I measured it and it measures around 52" to 54" wide.
    Plus, i saw some pictures on the internet of a RS 1303 and it looked just like it.
    My question is: where can i get all of these parts to put this tiller back together?
    Please Help!

  2. #2
    Elite Member Don87's Avatar
    Join Date
    May 2010
    Posts
    4,226
    Location
    SW Pa.
    Tractor
    Massey Ferguson GC2400

    Default Re: Yanmar PTO Tiller

    Try here Tiller
    Don

    MF GC2400, FEL, 60in.MMM, 5ft. Cultivator, Single Bottom Plow, Bush Hog RTC48 tiller, MF 2360 front mount snowblower, 5ft backblade. BXpanded Piranha toothbar.

  3. #3
    New Member
    Join Date
    Sep 2010
    Posts
    2
    Tractor
    long 445

    Default Re: Yanmar PTO Tiller

    Thank you, but i sent them an e-mail asking if there is any other parts that they sell besides Tines. It appears that is all they sell, as far as my tiller is concerned.

  4. #4
    Elite Member Don87's Avatar
    Join Date
    May 2010
    Posts
    4,226
    Location
    SW Pa.
    Tractor
    Massey Ferguson GC2400

    Default Re: Yanmar PTO Tiller

    Quote Originally Posted by wartelwm View Post
    Thank you, but i sent them an e-mail asking if there is any other parts that they sell besides Tines. It appears that is all they sell, as far as my tiller is concerned.
    That was the first on the list when I searched.

    Type: parts for yanmar rs1303 tiller into your browser . see what ya can find.

    If that doesn't work, try to get numbers off your bearing or remove a good one from the other side if you can.

    You can make your own gasket, gasket material is available at any auto parts store.

    Chains and links are available at any TSC store and online.(chain size should be stamped on each link)

    Bolts can be purchased at most any hardware store.

    Look here for bearings and chains, they shipped my stuff real fast. http://www.thebigbearingstore.com/index.html
    Don

    MF GC2400, FEL, 60in.MMM, 5ft. Cultivator, Single Bottom Plow, Bush Hog RTC48 tiller, MF 2360 front mount snowblower, 5ft backblade. BXpanded Piranha toothbar.

Similar Threads

  1. Kubota tiller to Yanmar 1500D
    By vinh0330 in forum Yanmar
    Replies: 5
    Last Post: 04-11-2011, 08:20 AM
  2. Yanmar Tiller
    By Smooth in forum Yanmar
    Replies: 3
    Last Post: 03-13-2011, 03:11 AM
  3. Yanmar RS1400 tiller - Working rpm?
    By California in forum Yanmar
    Replies: 9
    Last Post: 11-14-2007, 02:36 PM
  4. Yanmar Tiller Tines
    By jlog in forum Yanmar
    Replies: 3
    Last Post: 07-08-2003, 06:43 PM
  5. Tiller Tiller
    By Titanic in forum Attachments
    Replies: 47
    Last Post: 02-18-2002, 06:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.