Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1

    Default Ford 4610 power steering leak

    Hey guys new to the forum but have been reading awhile

    I have a problem with my power steering. It's leaking like crazy where the arm connects to shaft on the left side of the tractor. I think it's the seals that are in there but I unscrewed the large nut but can't get the arm to come off and seperate from the shaft. Do I need to use a pulled or is there some other type of trick?

    Thanks

  2. #2
    Veteran Member Jerry/MT's Avatar
    Join Date
    Feb 2008
    Posts
    2,059
    Location
    Western Montana
    Tractor
    New Holland TD95D, Ford 4610 & Ferguson TO-30

    Default Re: Ford 4610 power steering leak

    Quote Originally Posted by Brarstar View Post
    Hey guys new to the forum but have been reading awhile

    I have a problem with my power steering. It's leaking like crazy where the arm connects to shaft on the left side of the tractor. I think it's the seals that are in there but I unscrewed the large nut but can't get the arm to come off and seperate from the shaft. Do I need to use a pulled or is there some other type of trick?

    Thanks
    Never done the job but they are is splined to the shaft so you'll have to use a puller.The seal is right behind it. Go to the NH web site and go into Parts and look at the parts breakdown. It will help you see how the parts go together.

  3. #3
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,774
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 4610 power steering leak

    a 2 jaw puller will pull the sector arm off the shaft.

    however.. sounds like the ps pressurized oil is leaking into the regular mechanical sump.. whole column needs help IMHO.

    soundguy

  4. #4

    Default Re: Ford 4610 power steering leak

    Used a puller and it got it off. Had to open from the otherside and took the shaft out and replaced the two o-rings. Put it back together and it's working now. Thanks fellas

  5. #5
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,774
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 4610 power steering leak

    sounds like more of a seeping than a gushing I thought was being dscribed earlier.

    soundguy

  6. #6

    Default Re: Ford 4610 power steering leak

    Ya I might have over exaggerated hah. Thanks though!

  7. #7

    Default Re: Ford 4610 power steering leak

    Also any suggestions for online parts dealers for NH and Ford tractors. Dealers around here are very over priced.

  8. #8
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,774
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 4610 power steering leak

    ytmag.com sells lots of parts. all depends on what ya need. hard to beat dealer items on some things, even if you can find a non oe cheaper.. sometimes OE parts are better.

    whatcha lookin fer?

  9. #9

    Default Re: Ford 4610 power steering leak

    Looking for seats for ford 4600 and 4610

    Then a turn signal light for my NH TN75FA

    Also for future because my friend got a hyd pump for his 3600 for $550 down from the USA and it was 1000+ up here. So I just want to find a good site that I can buy major parts fro. In the future.

  10. #10
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,774
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Ford 4610 power steering leak

    many farm stores carry generic seats that fit that common 2 bolt ford pattern on the hyd top cover. 69-99$ USD at many tractor supply stores for a comfy adjustable seat with arm rests in NH/Ford blue with black trim.. I have one on my 4600

Page 1 of 2 12 LastLast

Similar Threads

  1. Power steering 555c ford
    By Legga in forum Oil, Fuel & Lubricants
    Replies: 4
    Last Post: 06-15-2011, 06:55 AM
  2. Dealer Reputable Dealer
    By rmully in forum Yanmar
    Replies: 140
    Last Post: 05-06-2010, 11:55 PM
  3. Ford 800 power steering
    By tree grower in forum New Holland Owning/Operating
    Replies: 3
    Last Post: 10-11-2009, 07:43 AM
  4. Ford 3400 power steering leak
    By Sporket in forum New Holland Owning/Operating
    Replies: 0
    Last Post: 05-31-2009, 04:40 PM
  5. Power steering kit for Ford 640
    By Robert_in_NY in forum Ford Vintage Tractors
    Replies: 3
    Last Post: 07-01-2006, 01:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.