Results 1 to 4 of 4
  1. #1

    Default needs help with a cav injector pump on a ford 3000

    any help would be good
    I just finished a rebuild on my ford 3000
    all is back together and cant get the CAV injector pump to work
    did the sprocket and pump timming as manual says
    Allso have bleed the pump and fuel filters as manual says too
    after letting the injector lines off at the injector end get nothing
    no fuel at all

    in the past when bleeding the fuel system it bleed pritty quickly
    I have been though manual and everthing looks to be as it should be

    I am at a loss what to do next any help or ideas would be good
    thanks gav

  2. #2
    Gold Member
    Join Date
    Dec 2006
    Posts
    428
    Location
    Quebec
    Tractor
    Two Gravely Two L One with 10 h.p Dek-Diesel engine one Grillo 107d and one BCS 735 diesel

    Default Re: needs help with a cav injector pump on a ford 3000

    Hi! First You must to have a lot of fuel at the pump input. If you have. Bleed the body injection pump start about 30 sec for remove air in the injection pump. After bleed at injector (start for bleed). If solenoid stop look for the connection. I think you have a lot of air in your system. Good luck! Oldmech

  3. #3

    Default Re: needs help with a cav injector pump on a ford 3000

    hi
    What do you mean about If solenoid stop look for the connection
    I dont get what you mean

    it has lots of fuel out of the fuel tank
    have got all the air out of the fuel filter and pritty certain all the air is out of the pump
    but I will give it another try today
    thanks for the help
    gav

  4. #4
    Gold Member
    Join Date
    Dec 2006
    Posts
    428
    Location
    Quebec
    Tractor
    Two Gravely Two L One with 10 h.p Dek-Diesel engine one Grillo 107d and one BCS 735 diesel

    Default Re: needs help with a cav injector pump on a ford 3000

    Hi! Only some new injection have solenoid cut-off. Important For start and bleed Put throttle at full speed. Good luck! Oldmech

Similar Threads

  1. Ford 3000 Fluid types
    By Allemay in forum New Holland Owning/Operating
    Replies: 22
    Last Post: 04-27-2014, 07:36 PM
  2. Kubota L35 compared to Ford 3000
    By clsmith in forum Kubota Owning/Operating
    Replies: 3
    Last Post: 02-21-2012, 06:14 AM
  3. Ford 5000 vs 3000
    By luckylegs in forum New Holland Buying/Pricing
    Replies: 7
    Last Post: 03-10-2010, 10:40 PM
  4. Ford & IH finalize diesel divorce
    By Builder in forum Trailers & Transportation
    Replies: 72
    Last Post: 01-19-2009, 09:17 PM
  5. Parts Box Attached to Ford 3000
    By jlanglois in forum Attachments
    Replies: 3
    Last Post: 08-04-2003, 11:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.