Adjusting clutch

[twinjayhawks]

Can anyone tell me how to adjust my clutch? It engages right at the very end of the pedal coming all the way out. I can just slightly push the clutch and the drive disengages. I am afraid that it is slipping right now when the pedal is all the way out.

[Soundguy]

check your manual for the freeplay setting. that is how much you should be able to push the pedal before you encounter resistance.

if it is too tight / no or negative freeplay, you will wear the fingers as they will be in contact with the TO bearing constantly.

soundguy

[CharlieS]

As mentioned the manual should give spec's, but as a general rule 1 - 1 1/2 inches of free play are usually the norm.

[jones6780]

If you have the correct free play..... well you might need a new clutch.

Russell

[SPYDERLK]

Can anyone tell me how to adjust my clutch? It engages right at the very end of the pedal coming all the way out. I can just slightly push the clutch and the drive disengages. I am afraid that it is slipping right now when the pedal is all the way out.

Look for the linkage connecting to your clutch pedal. Somewhere in that linkage - between the pedal and the place where the linkage connects to a shaft entering the bell housing - is an adjuster. Adjust that to give you freeplay at the top of your pedal travel. Around an inch play is good.
larry