1 3/4" 6 spline PTO shaft

   / 1 3/4" 6 spline PTO shaft #1  

Auminer

New member
Joined
Feb 4, 2007
Messages
7
Location
S. E. Alaska
Tractor
'79 406 Unimog (does that count?)
Where can I find one this diameter? It's for the front PTO on my Mog and goes to an S3 Schmidt snowblower.
All I can find is the 1 3/8" diameter.

Thanks,
Dave
 
   / 1 3/4" 6 spline PTO shaft #2  
Did you try searching the metric equivalent?
 
   / 1 3/4" 6 spline PTO shaft #4  
If it were a common spline in the USA, you would think it would be mentioned in this spec:

"ASAE S203.14 FEB2004 Front and Rear Power Take-Off for Agricultural Tractors"

It's not. They only show a 45mm/1 3/4" with 21 teeth.

Good luck.
 
   / 1 3/4" 6 spline PTO shaft #5  
sounds like time for round stock and broaching.. :)
 
   / 1 3/4" 6 spline PTO shaft #6  
All i can find in the catalog are 20 spline 1-3/4" shafts and shaft adaptord. None of the 6 spline are this size

the manual alsoatates that rear pto (540 rmp) should be 6 spline; while mid PTO (1000 rpm) should be 20 spline
 
   / 1 3/4" 6 spline PTO shaft #7  
Not sure if this is exactly what you are looking for, but follow this link, then choose Brakes/Axles/Trans. in the menu, then scroll down a ways. PTO shafts listed & pics...

If nothing else, maybe they can help you find what you need..??

VonsMog used Unimog parts
 
   / 1 3/4" 6 spline PTO shaft #8  
G'day check out the bare co site i just had a quick look but could not find them on the US site but they are avail on the AUS site the number is B3725. Don't know why they are not avail over there but a call to them may be able to sort you out



Jon
 
   / 1 3/4" 6 spline PTO shaft #9  
Try Tisco. I used to find a lot of odd sizes from them.
 
   / 1 3/4" 6 spline PTO shaft #10  
Baum Hydraulics part number 03-32-00398. 1 3/4" 6 spline 10" long. Pretty spendy at
$108.36 catalog price. 800-228-9288

Kim
 
 
Top