Ford 1210 Fuel Problem

   / Ford 1210 Fuel Problem #1  

ALB

New member
Joined
Jan 21, 2012
Messages
19
Location
Cumming, Georgia
Tractor
Ford 1210
Hello, I just bought a Ford 1210. It ran great for the few times i cranked it but now i can't get it to crank. I noticed the fuel shut off valve was on C. Should it be on O? I'm not sure what that means.

thanks for your help.
 
   / Ford 1210 Fuel Problem #2  
Probably means Closed and Open. If true, obviously you want it open to run the engine. If you have run it out of fuel, then you will probably have to bleed the air out of the fuel lines, unless it may be a self bleeding system. I'm not familiar with that tractor, so you might post it in the Ford New Holland forum.
 
   / Ford 1210 Fuel Problem #4  
Let me know if you need help priming the system. I have a 1310. They should be the same.
 
   / Ford 1210 Fuel Problem
  • Thread Starter
#5  
Let me know if you need help priming the system. I have a 1310. They should be the same.

Thanks. I ran the battery down so i need to charge it up to try it again. I'll put the fuel valve on "O" this time and try it.
 
   / Ford 1210 Fuel Problem
  • Thread Starter
#6  
Thanks for all the help. Turned out ot be a stripped thread at the fuel pump and i wasn't giving it any fuel.
 
 
Top