Results 1 to 8 of 8
-
04-20-2012, 10:17 PM #1New Member
- Join Date
- Mar 2005
- Posts
- 10
- Tractor
- iseki TA 215
parts for FB-A van brunt grain drill
Looking for the seed cups that the tubes attach to on my FB 177A van brunt grain drill. I am looking for 8 seed cups in good usable condition. Willing to pay $100 + shipping for a set if you have some you are willing to part with. Thanks Chris.
-
04-20-2012 10:17 PM # ADS
-
02-18-2013, 02:14 PM #2New Member
- Join Date
- Feb 2013
- Posts
- 1
- Location
- Haubstadt, Indiana
- Tractor
- N/A
Re: parts for FB-A van brunt grain drill
I am looking for metal flexible seed chutes that are 1and 3/8 inch in diameter. They are roughly3 feet long im restoring a horse drawn american seeding ma hine company drill. I could use some help. Thank you
-
06-13-2013, 06:09 PM #3New Member
- Join Date
- Jun 2013
- Posts
- 6
- Location
- uttar pradesh, india
- Tractor
- FB 177A van brunt grain drill
Re: parts for FB-A van brunt grain drill
hello sir, we are the manufacturer of seed drill cup sets since 1983. we have a wide variety of cup sets available in 7,8,9,10 teeth. Our cup sets are of supreme quality, keeping in mind what are the requirements of a farmer towards their agriculture. we are the best in this job. so, if you have any queries please contact to
contact person :Ankit Agarwal
mobile no : +919897034679
email : govindcastingco@gmail.com
-
06-13-2013, 06:10 PM #4New Member
- Join Date
- Jun 2013
- Posts
- 6
- Location
- uttar pradesh, india
- Tractor
- FB 177A van brunt grain drill
Re: parts for FB-A van brunt grain drill
hello sir, we are the manufacturer of seed drill cup sets since 1983. we have a wide variety of cup sets available in 7,8,9,10 teeth. Our cup sets are of supreme quality, keeping in mind what are the requirements of a farmer towards their agriculture. we are the best in this job. so, if you have any queries please contact to
contact person :Ankit Agarwal
mobile no : +919897034679
email : govindcastingco@gmail.com
-
06-14-2013, 08:41 AM #5Elite Member
- Join Date
- Jan 2007
- Posts
- 2,966
- Location
- Coyote Flats,Tx
- Tractor
- JD 4255/Kubota M7040 HDC
Re: parts for FB-A van brunt grain drill
Seed cup(parts key #36) is little pricey from JD. Have you tried Burrels in Okla?
JJ1918M Tube ADD 46.21 USD
-
06-14-2013, 11:36 AM #6Gold Member
- Join Date
- Jan 2012
- Posts
- 258
- Location
- Great North of Michigan
- Tractor
- Kubota L2500, Oliver Super55
Re: parts for FB-A van brunt grain drill
Quality Farm Supply - Various Drill Tubes
look around for seed tubes on the net a bit. I'm not positive but I think they make a seed tube that has a built in cup in it especially for old JD type planters.
-
06-14-2013, 03:27 PM #7New Member
- Join Date
- Jun 2013
- Posts
- 6
- Location
- uttar pradesh, india
- Tractor
- FB 177A van brunt grain drill
Re: parts for FB-A van brunt grain drill
we are the manufacturer and supplier of seed drill cup sets (feed cup) with 7, 8 , 9 , 1 to our customers. These are widely used in various sectors. Our products are highly admired for their quality. These are gettable at market best rates.
contact person :Ankit Agarwal
mobile no : +919897034679
email : govindcastingco@gmail.com
-
06-14-2013, 03:32 PM #8New Member
- Join Date
- Jun 2013
- Posts
- 6
- Location
- uttar pradesh, india
- Tractor
- FB 177A van brunt grain drill
Re: parts for FB-A van brunt grain drill
we are the manufacturer and supplier of seed drill cup sets (feed cup) with 7, 8 , 9 , 1 to our customers. These are widely used in various sectors. Our products are highly admired for their quality. These are gettable at market best rates.
contact person :Ankit Agarwal
mobile no : +919897034679
email : govindcastingco@gmail.com
Reply With Quote
Similar Threads
-
Grain drill calibration
By flusher in forum General Vintage TractorsReplies: 1Last Post: 08-07-2009, 04:57 PM -
WSG Drill - John Deere Van Brunt
By savageayape in forum AttachmentsReplies: 0Last Post: 07-19-2008, 12:39 PM -
Grain drill - what model and what to set seed rate to?
By RancherSam in forum AttachmentsReplies: 0Last Post: 04-07-2008, 12:16 AM -
Case Grain Drill Question
By bcsawyer in forum Case-IHReplies: 4Last Post: 11-04-2007, 10:47 PM
