Deere pto problems

   / Deere pto problems #1  

Believer

Silver Member
Joined
Aug 17, 2008
Messages
164
On my 6210, the pto won't start. It has the lift and rotate actuator. I just replaced the speed sensor. Sometimes it will turn a couple seconds, sometimes not. Light on the console blinks. Any help would be appreciated.
 
   / Deere pto problems #2  
My guess is the problem is with the PTO engagement valve. It's located to the right of the toplink bracket.

It is solinoid operated. It could be the solinoid or the spool of the valve is binding if the solinoid is OK.

It has two pressure test ports marked CLUTCH and BRAKE.

The system presssure should be 170psi at the BRAKE port with PTO disengaged. It should drop to zero when the PTO is engaged.

CLUTCH port should have zero pressure with PTO disengaged and 170psi with PTO engaged.
 
 
Top