Results 1 to 2 of 2
05-23-2012, 08:39 AM #1
- Join Date
- Aug 2008
Deere pto problems
On my 6210, the pto won't start. It has the lift and rotate actuator. I just replaced the speed sensor. Sometimes it will turn a couple seconds, sometimes not. Light on the console blinks. Any help would be appreciated.
05-23-2012, 11:19 AM #2
- Join Date
- Aug 2010
- South West MI
- John Deere 2030, John Deere 6415
Re: Deere pto problems
My guess is the problem is with the PTO engagement valve. It's located to the right of the toplink bracket.
It is solinoid operated. It could be the solinoid or the spool of the valve is binding if the solinoid is OK.
It has two pressure test ports marked CLUTCH and BRAKE.
The system presssure should be 170psi at the BRAKE port with PTO disengaged. It should drop to zero when the PTO is engaged.
CLUTCH port should have zero pressure with PTO disengaged and 170psi with PTO engaged.John Deere 2030 JD 245SL Loader
John Deere 6415 mfwd JD 640SL Loader
By JBarnes6767 in forum John Deere Owning/OperatingReplies: 88Last Post: 12-04-2013, 10:07 PM
By 8226hamer in forum Kubota Owning/OperatingReplies: 276Last Post: 05-13-2013, 09:35 AM
By blackfalcon in forum AttachmentsReplies: 2Last Post: 11-20-2011, 07:16 PM
By VTtractorguy in forum John Deere Owning/OperatingReplies: 4Last Post: 07-19-2011, 08:36 AM
Buying Advice Deere 4400 MID PTO KIT LVB25037 NEED????By mwkewer33 in forum John Deere Buying/PricingReplies: 1Last Post: 09-24-2010, 07:55 PM