Results 1 to 2 of 2
08-09-2012, 12:04 AM #1
- Join Date
- Aug 2012
- Saskatoon Sask
- Iseki TX1410F
Iseki TX1410F Hydraulic Issues
Hi, I am having trouble with a Iseki TX1410F, I used it for about 50 hours on a rototiller and everything worked 100%. Then one day it quit lifting, I cleaned out the filters, it worked briefly, then quit lifting again, I cleaned the filters again, pulled out the valve under the seat, found one of the o-rings off, I put it back on and everything worked great for another 4 hours. Then it hesitated lifting a couple of times and quit again all together. I cleaned the filters again, changed oil, pulled a line off the hyd pump briefly to see if pump was working (it seems to be fine). I have the flow valve open (controls lift speed, etc), was a great little tractor and now I am completely puzzled about what to do!! I lift the tiller manually and it will stay up for a day, then it seeps down. When I detach the tiller the arms will lift themselves slowly but then you can hold them back easily by hand. Please help!!!!
Last edited by Goodtimes; 08-09-2012 at 10:29 AM.
09-03-2012, 01:37 PM #2
- Join Date
- May 2010
- Iseki TX1510
Re: Iseki TX1410F Hydraulic Issues
I have a Iseki TX1510F, and I had a similar problem. In my case it were the sealings on the piston of the hydraulic cylinder. Probably they have weared out.
3-Point Hitch Hydraulic IssuesBy M Johnston in forum John Deere Owning/OperatingReplies: 3Last Post: 05-31-2012, 12:11 AM
By wises4057 in forum IsekiReplies: 1Last Post: 05-27-2012, 06:52 AM
By Mike hitchcock in forum Parts/RepairsReplies: 6Last Post: 04-20-2011, 09:21 AM
By big bear 4 in forum IsekiReplies: 3Last Post: 04-23-2009, 11:17 PM
By NCGMAN in forum IsekiReplies: 4Last Post: 04-04-2008, 11:39 PM