Results 1 to 3 of 3
-
08-19-2012, 01:37 PM #1New Member
- Join Date
- Aug 2012
- Posts
- 4
- Location
- Rochester
- Tractor
- John Deere, New Holland
New Holland TC45DA Starting Problems
We have a 57 plate TC 45 DA on hire its been working well until yesterday it was driven across the field, the operator got off to adjust the mower, got back on it and it had lost all it electrics, no ignition lights, won't turn over, no hazard lights totally dead. We have checked everything we can think of, any ideas as we are behind and would like to make most of the weather before it rains again!!!!!!!!!!!!!!!!!!:
-
08-19-2012, 07:43 PM #2Veteran Member
- Join Date
- Feb 2008
- Posts
- 1,806
- Location
- Western Montana
- Tractor
- New Holland TD95D, Ford 4610 & Ferguson TO-30
Re: New Holland TC45DA Starting Problems
Have you checked the fuses, the battery and the battery terminals and the grounds??
-
08-20-2012, 08:35 PM #3New Member
- Join Date
- Oct 2010
- Posts
- 21
- Tractor
- New Holland TC35D
Re: New Holland TC45DA Starting Problems
I have essentially the same issue on TC35D... all fuses are good. Had not run for 4 weeks.. I had to use jumper cables to get started... let it run for several minutes while I was putting up tools and such... suddenly died on it own... now its dead as it can be. I had cleaned terminals check cables and ground? Any suggestions out there.
Similar Threads
-
New Holland TC 18 intermittent clicking when starting
By mr2step in forum New Holland Owning/OperatingReplies: 2Last Post: 08-20-2012, 10:47 AM -
TC45da glow plug problems
By Tc45Canuck in forum New Holland Owning/OperatingReplies: 1Last Post: 12-05-2011, 01:45 PM -
TC45DA starting problem
By BlueCanuck in forum New Holland Owning/OperatingReplies: 2Last Post: 07-07-2009, 04:58 PM -
TC45DA (Cab) issues, problems and things you should be aware of
By LoneCowboy in forum New Holland Owning/OperatingReplies: 2Last Post: 06-30-2007, 10:28 AM -
2 new problems on a tc45da
By h10doc in forum New Holland Owning/OperatingReplies: 6Last Post: 06-03-2007, 01:30 PM


Reply With Quote

