Results 1 to 4 of 4
-
10-01-2012, 01:42 PM #1New Member
- Join Date
- Oct 2012
- Posts
- 3
- Location
- gasport new york
- Tractor
- 2001 new holland tc25d
hydralic oil leak
my 2001 new holland tc25d is leaking oil down onto the mower deck. oil is coming out a hole that is between front and rear transmission drain plugs.hole is threaded but has no plug in it and i am able to stick a screwdriver into hole several inches, any suggestions? dealer wasnt much help
-
10-01-2012, 03:00 PM #2Epic Contributor
- Join Date
- Mar 2002
- Posts
- 42,124
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: hydralic oil leak
is the hole in the dry area of the bellhousing.. aft of engine oil pan but ahead of trans pan? if so it could be a weep hole.. old fords had them.. was to leat oil escape the clutch housing if the rear main or tranny input shaft seals leaked.
it engine oil or utf fluid?
-
10-01-2012, 05:16 PM #3New Member
- Join Date
- Oct 2012
- Posts
- 3
- Location
- gasport new york
- Tractor
- 2001 new holland tc25d
Re: hydralic oil leak
utf fluid
-
10-02-2012, 10:27 AM #4Epic Contributor
- Join Date
- Mar 2002
- Posts
- 42,124
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: hydralic oil leak
tranny input shaft seal...
Similar Threads
-
new member hydralic oil leak
By jeremyarcher054 in forum HydraulicsReplies: 2Last Post: 09-14-2012, 03:16 PM -
Kubota L4330 High pressure hydralic leak
By randy Wright in forum HydraulicsReplies: 5Last Post: 01-31-2008, 05:21 PM -
YM2500 HYDRALIC LEAK
By Travis_R in forum YanmarReplies: 42Last Post: 03-09-2007, 01:02 PM -
2015 HST hydralic leak
By fyrewil in forum Mahindra Owning/OperatingReplies: 1Last Post: 10-22-2006, 11:11 AM -
Hydralic leak on FEL
By nhman in forum Kubota Owning/OperatingReplies: 5Last Post: 09-02-2002, 06:10 PM


Reply With Quote

