Power King Engine Removal

   / Power King Engine Removal #1  

leo9

New member
Joined
Nov 12, 2012
Messages
9
Location
MA
Tractor
Power King Model 1614
I need to pull the Engine on my Power King 1614 and need some advise on the best way to separate the engine from the clutch/transmission. None of the manuals that I have been able to find do not mention this subject. Any suggestions would be appreciated.
 
   / Power King Engine Removal #2  
Is this one of the older ones with a Kohler engine? Should be pretty simple.

I sent you a private message. Click on the envelope above.
 
   / Power King Engine Removal
  • Thread Starter
#3  
Is this one of the older ones with a Kohler engine? Should be pretty simple.

I sent you a private message. Click on the envelope above.


Thanks for your interest and yes my machine has a Kohler 14 hp K321s engine. It is one of the older ones Ser# 47133
 
   / Power King Engine Removal #4  
I saw one for sale today with equipment and extra tires near Salisbury, NC.
 
   / Power King Engine Removal
  • Thread Starter
#5  
To close out this thread I wanted to report that the advice to separate the engine by removing the eight bolts between the clutch housing and the clutch pedal housing was the thing to do. With the help of a hoist the engine came away very easily.

As an aside, my tractor has a bucket which was in the way most of the time but after hoisting the engine I placed a piece of plywood across the arms of the bucket and had myself a work bench.
 
 
Top