Results 1 to 3 of 3
  1. #1

    Join Date
    Jul 2003
    Posts
    35
    Location
    North Carolina
    Tractor
    Shabaura D28F

    Default Shibaura D28F PTO

    Does anyone know why my PTO shaft doesn't turn when I turn the switch on?The switch is located on the dash and if you keep playing with it by turning it on and off the shaft will start turning.If you turn the switch off for a day then turn it back on the shaft doesn't turn.I'm guessing that the switch is the problem but not sure how to check it to make sure.

  2. #2

    Join Date
    Jul 2003
    Posts
    425
    Location
    SW Alabama
    Tractor
    NH TC-33D

    Default Re: Shibaura D28F PTO

    It could be the switch or the solenoid. You can check the switch by either using a voltmeter or a simple automotive light bulb. Touch one lead to neg and the other to one side of the switch with the switch off, If voltage is present move the lead to the other side of the switch, if no voltage then flip the switch several times and if it shows voltage the switch is good.

    If that's the case I would check the solenoid, it may just need a bit of lube on the plunger.

  3. #3

    Join Date
    Jul 2003
    Posts
    35
    Location
    North Carolina
    Tractor
    Shabaura D28F

    Default Re: Shibaura D28F PTO

    Well thanks for the info.David,Now my question is where is the selonoid located.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.