Results 1 to 5 of 5
-
11-17-2012, 11:46 AM #1New Member
- Join Date
- Nov 2012
- Posts
- 2
- Location
- McDaniel, MD
- Tractor
- Kubota, B2620 with loader and belly mower
Kubota B2620 start problems
I have a Kubota B2620 with 250 hours. It will not crank. Removed startersolonoid and had it tested by Pasco . Said starter and solonoid work fine. Reinstalled. Checked safety swithes by turning ignition on and without sitting on seat, pressed HST pedal back and forth and heard relay click. Same result when repeated with PTO lever. Get no sound when move range lever through H,N,M,L. Greatly appreciate any help.
tnorrisLast edited by tnorris; 11-17-2012 at 12:10 PM. Reason: typos
-
11-17-2012, 12:20 PM #2Silver Member
- Join Date
- Aug 2009
- Posts
- 180
- Location
- loganville ga
- Tractor
- wheel horse c-100
Re: Kubota B2620 start problems
can you make a jumper wire to go from "+" battery post on starter to switch/solenoid hook up on solenoid by doing this you will see if starter attempts to start by bypassing the switch ALWAYS MAKE SURE TRATCOR IS IN NEUTRAL WHen DOING THIS if it trys to start time to look at wiring problem possibly ignition switch or some type of relay have any questions just post them
-
11-17-2012, 02:06 PM #3New Member
- Join Date
- Oct 2012
- Posts
- 17
- Location
- Fenton, Mi
- Tractor
- Kubota L2550GST(4wd), Mitsubhish MT160D (4wd)
Re: Kubota B2620 start problems
If the jumper wire methods works, also check for a blown fuse maybe?
-
11-17-2012, 03:05 PM #4New Member
- Join Date
- Nov 2012
- Posts
- 2
- Location
- McDaniel, MD
- Tractor
- Kubota, B2620 with loader and belly mower
Re: Kubota B2620 start problems
Thanks to Mitch Becton and Country Guy. Your suggestions were very helpful in the diagnosis. I tried all sorts of things and finally hooked up my Marine deep cycle and she started right up. I had removed the battery that came with the tractor (250 hours) and put it on charge. It started charging at 2 amps (which means it wasn't very discharged. I let it charge over night and then reinstalled. No change. the glow light on the battery was green all along.
Thanks again,
tnorris
-
11-17-2012, 06:10 PM #5New Member
- Join Date
- Jun 2009
- Posts
- 17
- Location
- Dallas TX
- Tractor
- 1968 FORD 4500 FELB 1968 Massey 1100, 1959 Massey 35, 2000 Kubota B7500HST, 1987 Kumatsu D20-PL6A, 1974 Sears Garden tractor, 1982 Gravely 5260 , 1965 Gravely Model L DOE
Re: Kubota B2620 start problems
I've had same issue with 12 year old B7500HST and the little 3 banger. Sometimes it'll start with the switch and sometimes it takes a screw driver across the terminals on the bendix. Its a tractor.... it needs to have an auxiliary starter button somewhere hidden out of the way of the kids for just such occasions. My Komatsu dozer has a no restart relay on top of the starter bendix which is supposed to keep one from shaving off the teeth on the ring gear. It quit starting. It's interconnected with the alternator somehow so I did some creative wiring and now it starts but doesn't generate.
I'll fix it correctly when I have a chance.
Similar Threads
-
2011 B2620 Won't Start
By CScottG in forum Kubota Owning/OperatingReplies: 8Last Post: 07-09-2012, 12:33 PM -
B2620 won't start... Need some advice
By Botabill in forum Kubota Owning/OperatingReplies: 6Last Post: 07-27-2011, 07:18 PM -
Price Check Kubota b2620
By knobie2005 in forum Kubota Buying/PricingReplies: 24Last Post: 11-30-2010, 10:23 AM -
3-Point Hitch New B2620 Problems
By diesel466 in forum Kubota Owning/OperatingReplies: 12Last Post: 08-19-2010, 07:50 PM -
Lift height problems with KK rake on B2620
By seapea in forum Kubota Owning/OperatingReplies: 26Last Post: 03-19-2008, 11:17 AM


Reply With Quote

