Results 1 to 2 of 2
  1. #1
    Gold Member TraderMark's Avatar
    Join Date
    Feb 2001
    Posts
    367
    Location
    Southeast Georgia
    Tractor
    Ford 1720

    Default Sharing key swtich info for 1720 Fords

    I thought it was time I give something back for all the information I've gleaned from this forum!

    I recently had electrical problems with my 1720.
    The alternator went bad.
    The battery went bad.
    AND the key switch went bad, all in the space of a couple months.

    I replaced the battery, found a new aftermarket alt on fleabay, but the key switch had to come from Ford. I couldn't find an aftermarket switch that would work with the glow plugs.
    There are 5 different key switches listed for the 1720. Of course, the parts listing for my tractor called for the most expensive of them all @ 125.00. But what I found was, part# SBA385201900 fits my 1720 perfectly. It just doesn't come with the little pigtail wiring harness the others come with. The index numbers on the back of the switch are the same, it takes the same key as the old switch, but it was ~70 bux so it saved me a good deal.

    Hope this helps someone else!

    Mark
    1720 Ford 4x4 w/ 7108 FEL
    Case 1845 Uni-Loader NO it's NOT a "C"
    190C John Deere
    Various implements, some store bought, some home made.

  2. #2
    Silver Member roman's Avatar
    Join Date
    Apr 2010
    Posts
    152
    Location
    New Hampshire Llive Free or Die (yeah right)
    Tractor
    Ford 1720

    Default Re: Sharing key swtich info for 1720 Fords

    Thanks Mark!
    Ford 1720, Sims cab, FEL, Woods subframe backhoe, Fisher 7' hydro angle plow, Wallenstein 3 pth splitter, 5' blade, 3 pth carry-all, 3 pth ballast

Similar Threads

  1. Found that the DK45SE must have a tilt swtich that kills the engine
    By tpulley in forum Kioti Owning/Operating
    Replies: 7
    Last Post: 09-18-2012, 02:52 PM
  2. Sharing info on kerosene heaters
    By SARG in forum Rural Living
    Replies: 0
    Last Post: 01-29-2011, 11:07 AM
  3. TC40DA NO Power to swtich/panel - hazards work
    By lhfarm in forum New Holland Owning/Operating
    Replies: 4
    Last Post: 06-11-2010, 08:35 PM
  4. Info sharing
    By GRASSMAN in forum New Member Introductions
    Replies: 1
    Last Post: 05-01-2010, 10:59 AM
  5. 186D info sharing
    By MDL in forum Yanmar
    Replies: 20
    Last Post: 06-06-2002, 05:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.