OK, I went back to the crime scene. Starting at the the radiator on the head cover I marked the pistons 1, 2, 4, 3. I rechecked the points and they were at .016 and I adjusted. It must have been the gap on the plugs were .025 not .026. People say I am getting dyslexic??? It is simpler not taking off the metal and sliding the radiator to the side. Thanks for the info Murphy, and I guess that I just took your post the wrong way. Anyway, I re-did checking the wires. I pulled the spark plugs and I get about a 1/4 inch of spark from the spark test. They all seem to be close to the same.
I have had this tractor since 2005. It sat in a field at a tractor repair shop for a couple years I saw it every time we went to church and back home, and one day it was gone so I stopped in the new day to see what happen to it and they had brought it in and fixed it up and I bought it for $1,200.oo. I had to get new rims on the back after the first year due to rusting and I have to do the same for the front wheels now. I never keep more that a gallon or so in it and drain it in the winter to the bowl. year before last in the fall it started to stop running after and hour or so. Last year it did it again and so I would use it an hour at a time, and this fall after cleaning the garden it just shut off and I would not crank again and I ran the battery dead. I charged the battery and it started but ran sluggish and sputtered and spattered and I got it to the driveway so when I found out what was wrong I could push it into the garage.
I did not notice the leaking at the choke until it was in my garage. I cut the fuel off and put a can under it to catch the fuel. It stopped after a bit. I put on all the stuff and have checked it. The starter has a new solenoid and seems to have more power, but it still skips every now and then. It is not leaking now, but will not start. It sure sounds like it wants to take off. I checked the fuel line and it is getting fuel at least to that point.
I did not get what Soundguy was saying about the carburetor. So I need to get a kit first and try that and then a carb?
I do not have a crank and knew of them for some tractors but that is news to me. I will look online for one.
The economy has hit us all very hard. I do not have the luxury of having money I can use unwisely. I am the student here. I do appreciate everyone's kindness. If I have pissed someone off then it will not be the first time that I have done that. It usually does not last long and bygone's will be bygone's. Thanks