Results 1 to 3 of 3
  1. #1
    Gold Member
    Join Date
    Dec 2001
    Posts
    330
    Location
    Plum City, WI
    Tractor
    Used Yanmar and Iseki

    Default YM2610D front axle shims for slop

    Has anyone had to shim the front 4x4 axle pivot point on a YM2610D?? My front axle moves forward and backward on its pivot about 1/8 of an inch. Is there Yanmar shims made for that to make up for the wear or what have other guys done?
    Thanks for the help in advance!
    Nick

  2. #2
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,364
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: YM2610D front axle shims for slop

    I've never done it on a yanmar.. but shims are common on older farm tractors.. like 8n's, etc... we frequently shim fore and aft of the kingpin, and even shim the axle stops if the bushing is worn a bit... decent bandaids till you can rebushing and repair correctly.

    Soundguy

  3. #3
    Elite Member
    Join Date
    Sep 2002
    Posts
    3,128
    Location
    Red Bluff, CA
    Tractor
    Changes often!

    Default Re: YM2610D front axle shims for slop

    Nick, we have a really good fastener shop in Red Bluff. I took a shim from a 3110 and they were able to supply me with a couple of exact matches in different thicknesses. If you can't do the same locally let me know and I'll hook you up with these guys and they can ship you what you need.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.