Results 1 to 4 of 4
-
02-13-2013, 09:13 PM #1New Member
- Join Date
- Feb 2013
- Posts
- 1
- Location
- CAMPBELLSVILLE,KY
- Tractor
- INTERNATIONAL 674
TOE IN SETTING FOR 674 INTERNATIONAL
JUST REPLACED TIE RODS ON MY 674 INTERNATIONAL TRACTOR ,WHAT SHOULD BE THE SETTING OR MEASUREMENT FOR CORRECT ALIGNMENT.
-
02-13-2013 09:13 PM # ADS
-
02-13-2013, 09:24 PM #2Platinum Member
- Join Date
- Mar 2002
- Posts
- 695
- Location
- East Texas
- Tractor
- Kubota L4610 HSTC, International 2400, Hesston 1280,
Re: TOE IN SETTING FOR 674 INTERNATIONAL
Just a guess on my part, but would guess about 1/8" toe in.
Neal
-
02-13-2013, 10:23 PM #3Platinum Member
- Join Date
- Feb 2008
- Posts
- 707
- Location
- Eugene, Oregon
- Tractor
- Montana 4344HST
Re: TOE IN SETTING FOR 674 INTERNATIONAL
I would go a 1/8 to a 1/4 inch. Toe on a tractor isnt as critical as a car; just get it toed in some and call it good
Sackett aka "Steve"
TSgt, USAF Ret. 1981-2001
2008 Montana 4344HST
4' Brush Hog; 6' rear blade; 6' box blade
"Thanks for the tractor Rick"
In memory of my brother
Richard A. Hansen 1961-2008
SSgt, USAF Ret. 1980-2000
-
02-13-2013, 10:27 PM #4Elite Member
- Join Date
- Feb 2011
- Posts
- 4,172
- Location
- Frederick County, VA
- Tractor
- Kubota BX2360 & L4240 HSTC
Re: TOE IN SETTING FOR 674 INTERNATIONAL
Around a 1/8"
Roger
My Threads
Reply With Quote
Similar Threads
-
INTERNATIONAL 674
By PJWALKER in forum Case-IHReplies: 4Last Post: 09-11-2012, 02:32 PM -
Toe-In Setting
By bill18163 in forum Kubota Owning/OperatingReplies: 3Last Post: 06-05-2012, 07:34 PM -
International 674 Tractor Price
By landrand in forum Buying/Pricing/ComparisonsReplies: 5Last Post: 09-03-2010, 03:54 PM -
International 674
By Old Red in forum Case-IHReplies: 12Last Post: 10-29-2009, 07:47 PM -
International 674 Shifter Hung
By sljones in forum Case-IHReplies: 3Last Post: 04-20-2009, 05:27 PM
