Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25
  1. #21
    Bronze Member
    Join Date
    May 2008
    Posts
    53
    Location
    Wheatland, Oklahoma
    Tractor
    Ford 851 Powermaster

    Default Re: 3 point problems on 851

    OK, I pulled the side plug on the trans and a little fluid started coming out.
    Then pulled the hyd drain plug and only fluid.???????
    One of my neighbors has Allis C. tractors, big ones for tractor pulls, I ask him and he didn't seem to know much about toys. He did ask if there is an enternal hyd fluid filter that might be stopped up which would cause foaming..Geee I just don't know what to do here....

  2. #22
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    46,360
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: 3 point problems on 851

    no external hyd filter.

    if there is no water in the hyds.. AND trans is at normal level, engine is at normal level, and diffy is at normal level.. thent he overfill int he hyds won't hurt anything.

    if the 3pt is eratic.. you will actually haveto fix it.

    top cover kit is about 15$

  3. #23
    Bronze Member
    Join Date
    May 2008
    Posts
    53
    Location
    Wheatland, Oklahoma
    Tractor
    Ford 851 Powermaster

    Default Re: 3 point problems on 851

    Problem solved. Replaced the pin (5/16" x 7/8" ), about 5 bucks and the cover gasket kit 15 bucks ( the only things that would fit, Oring for hyd. cyld. ) the main gasket even had to be trimed around bolt holes to work!!! It has made in USA stamped right on it, one would think better from our own people.

  4. #24
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    46,360
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: 3 point problems on 851

    I posted this in post #2,,, top cover kit and cam follower pin.

  5. #25
    Bronze Member
    Join Date
    May 2008
    Posts
    53
    Location
    Wheatland, Oklahoma
    Tractor
    Ford 851 Powermaster

    Default Re: 3 point problems on 851

    Yes you did!!! But there are some of us that try all the easy ways first. You noticed, of course, I did ask a lot of questions. And by doing so I was able to learn some other things---YEAAAAAA!!
    Thank all of you for your input on this matter. I was able the turn over some dirt today, I was singing in sunshine, I just love my tractor----Bye for now all, and again THANKS

Page 3 of 3 FirstFirst 123

Similar Threads

  1. 851 Powermaster 3 point
    By bbrixey in forum Parts/Repairs
    Replies: 1
    Last Post: 09-26-2012, 08:36 AM
  2. 3-Point Hitch 3 point problems
    By pwalker97 in forum John Deere Owning/Operating
    Replies: 6
    Last Post: 03-08-2012, 07:51 AM
  3. 3-point problems
    By Wickedskygazer in forum Hydraulics
    Replies: 0
    Last Post: 02-10-2011, 11:49 PM
  4. ford 851 problems
    By bcnla in forum Owning/Operating
    Replies: 11
    Last Post: 08-22-2009, 01:00 AM
  5. 3-Point Hitch 3 Point Hitch Problems?
    By koop in forum Case-IH
    Replies: 8
    Last Post: 05-30-2007, 07:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.