Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Mar 2013
    Thomasville NC
    MF 1020

    Default 3pt lift

    I just got a MF 1020 that had been sitting for 4 or 5 years I have it running but the 3 point will not work? I have turned the knob fully both ways any help on what to do next would be nice Thank you!

  2. #2
    Bronze Member
    Join Date
    Mar 2010

    Default Re: 3pt lift

    First change the hydraulic fluid and see if that helps.

  3. #3
    Elite Member
    Join Date
    Sep 2007
    Doniphan, Mo.
    Kubota L4240, B7800 & BX2660

    Default Re: 3pt lift

    You need to find out if the pump is pumping, and with the hard lines running all the way from front to back it might be hard to unhook at the rear to check for flow. If it has the oil cooler there are some connections there you might unhook and check for flow. The pump isn't hard to pull to check shaft, the inlet hose is short and stiff that might be a bear. I can't remember a place that a gauge could be hooked up.

Similar Threads

  1. help with 3pt lift.
    By Lickity Split in forum Parts/Repairs
    Replies: 0
    Last Post: 05-04-2009, 06:41 PM
  2. 3pt won't lift
    By norgeman in forum Attachments
    Replies: 2
    Last Post: 05-11-2008, 01:52 PM
  3. IH-444 3pt lift will not lift
    By BKJ in forum Case-IH
    Replies: 3
    Last Post: 03-08-2005, 02:05 PM
  4. 3pt lift
    By heehaw in forum Kubota Owning/Operating
    Replies: 4
    Last Post: 02-10-2003, 01:09 PM
  5. 3pt lift
    By gws in forum Yanmar
    Replies: 6
    Last Post: 04-26-2002, 08:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.