Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Apr 2013
    Erie, PA
    JD 5205

    Default JD Hoe Subframe Part #LVA13818 "NEEDED" Cast Draw Bar Support!

    I recently obtained a JD 48 hoe with a sub frame (#LVB25179) for my JD5205, but it has the rear hanger (#LVA11334) for a welded draw bar support and I have the cast draw bar support, guess I needed (#LVB25747). That being said I done my research and found that JD wants just shy of $1400 list for the part (#LVA13818), yet I can buy a new whole goods sub frame for less, figure that one out. This hanger is the same for all 47 48 and 49 hoe sub frames even though the 49 sub frame is slightly different (the hanger bracket is the same for "cast" setups).

    My other option is to change to the older welded draw bar support (#RE73039 listed for the 5205, but I'm sure #RE178644 is the same) which is the cheaper option (only slightly) as it appears to be the same bolt on pattern as the cast multi piece setup,....can anyone confirm this???

    If any one has either part (#LVA13818 rear hanger for cast draw bar support) or (#RE73039/#RE178644 welded draw bar support) or even an entire whole goods sub frame (#LVB25747) please contact me.

    Any insight would be helpful.



  2. #2
    Super Member Tx Jim's Avatar
    Join Date
    Jan 2007
    Coyote Flats,Tx
    JD 4255/Kubota M7040 HDC

    Default Re: JD Hoe Subframe Part #LVA13818 "NEEDED" Cast Draw Bar Support!

    JD whole goods have been cheaper than parts price since way back when I worked for a JD dealer back in the 60's- late 80's.

Similar Threads

  1. An "axle-surrounding" type backhoe subframe
    By len10 in forum Build-It Yourself
    Replies: 36
    Last Post: 05-25-2013, 03:42 PM
  2. Replies: 3
    Last Post: 04-03-2013, 06:44 PM
  3. "No-PreHeat" Cast Iron Repair Technique
    By ChuckE2009 in forum Welding
    Replies: 5
    Last Post: 03-20-2013, 11:38 PM
  4. Craftsman 42" Mower deck part needed
    By Keppie in forum Craftsman / Sears
    Replies: 5
    Last Post: 04-02-2009, 12:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.