Results 1 to 2 of 2
  1. #1
    Silver Member
    Join Date
    May 2001
    Posts
    192
    Location
    Scottish Highlands, UK
    Tractor
    Kubota B2150HSDB 4WD

    Default KM190 backhoe control valve leaking

    Hi guys

    I don't know if anyone will be able to help me with this but I thought I would post this just in case. I have a kubota compact tractor with a KM190 backhoe. The control valve assembly on the backhoe has a leak on one of the valves. I removed it and took it to the nearest dealer who said that it would need a replacement "slice". They have tried to get one from McConnel, who made the backhoe for Kubota, but they can't supply the part.

    I will try to attach the diagram from the manual. The leaking valve is identified by number 18.

    Thanks in advance for any help.

    Andyfr.
    Attached Files Attached Files

  2. #2
    New Member
    Join Date
    Jun 2013
    Posts
    2
    Location
    Edinburgh
    Tractor
    Kubota B6200

    Default Re: KM190 backhoe control valve leaking

    Hi Andy,

    I'm pretty sure it was you who I spoke to a couple of years ago to get a manual for my KM190. However, it seems your machine has started showing the same symptoms as mine had: over use and poor design. I don't know whether or not you were able to get your valves fixed but I took my spool valve block to a local hydraulic specialist and he was able to fix the problem of oil leaking from the top of the spindle by removing the affected spindle and fabricating slightly oversized brass collets/seals which then stopped the oil from seeping out of the top. That was about 6 months ago and the digger has had some hard use since then and no more leaks (from the spool valve anyway, the rams are a different story!).

    The problem is caused by the non linear movement of the spindle up and down every time the control handle is moved, there is always a bit of side to side motion as well and over the years this wears the block down until one day oil starts appearing at the top when you raise the spindle.

    I hope that helps a bit or that you already have your machine fixed! I couldn't ask for a better digger as th ereach is fantastic compared to modern small machines and the power is fantastic for the size of it as well, given I am running it off a 15HP tractor!

    All the very best.

    Iain

Similar Threads

  1. 2001 873 leaking out of the back side of the control valve
    By chris maggio in forum Bobcat Construction Equipment
    Replies: 1
    Last Post: 12-28-2011, 08:55 PM
  2. Bucket control valve leaking.
    By terraformer in forum Hydraulics
    Replies: 2
    Last Post: 06-23-2011, 09:25 PM
  3. Backhoe backhoe control valve leaking
    By Ron3054 in forum Kioti Owning/Operating
    Replies: 5
    Last Post: 10-07-2009, 06:13 PM
  4. Loader control valve leaking
    By AlanB in forum New Holland Owning/Operating
    Replies: 1
    Last Post: 02-23-2004, 08:38 PM
  5. Leaking loader control valve
    By Wheeldog in forum Kubota Owning/Operating
    Replies: 9
    Last Post: 03-13-2001, 03:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.