Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Jun 2013
    Posts
    2
    Location
    brenham, texas
    Tractor
    case IH JX80U

    Default pto won't engage

    Hi hope this is the right place for this question. Baled hay last year no problem. This year went out to bale and pto won't engage. I have a Case IH JX80U. Electric pto. Connections look good. All fuses look good. disconnected connector near pto and tested voltage didn't seem to have any. wires looked ok. Any suggestions?

  2. #2
    Elite Member Don87's Avatar
    Join Date
    May 2010
    Posts
    4,226
    Location
    SW Pa.
    Tractor
    Massey Ferguson GC2400

    Default Re: pto won't engage

    Welcome to TBN.

    Although I don't anything like yours, I would go backwards from the PTO connector that you tested and it 'didn't seem to have any' power. Look at the switch and the wires between there and the PTO.
    Don

    MF GC2400, FEL, 60in.MMM, 5ft. Cultivator, Single Bottom Plow, Bush Hog RTC48 tiller, MF 2360 front mount snowblower, 5ft backblade. BXpanded Piranha toothbar.

  3. #3
    New Member
    Join Date
    Jun 2013
    Posts
    2
    Location
    brenham, texas
    Tractor
    case IH JX80U

    Default Re: pto won't engage

    Quote Originally Posted by Don87 View Post
    Welcome to TBN.

    Although I don't anything like yours, I would go backwards from the PTO connector that you tested and it 'didn't seem to have any' power. Look at the switch and the wires between there and the PTO.
    Thanks for the reply. What i thought was the pto connector was actually the speed sensor for the pto. i found the actuator solenoid and it is broken just hanging there with oil dripping off it. Now I need to figure out what to get and replace the defective parts.

Similar Threads

  1. Kubota G5200 Starter Doesn't Engage (Also a PTO belt question)
    By Lobanz in forum Kubota Lawn & Garden
    Replies: 6
    Last Post: 07-25-2013, 12:58 PM
  2. Mowing Kubota BX2230 PTO lever will not move to fully engage mower deck
    By robynk in forum Owning/Operating
    Replies: 4
    Last Post: 07-08-2013, 06:37 PM
  3. Ford 1900 Pto wont engage.
    By paintman161 in forum New Holland Owning/Operating
    Replies: 15
    Last Post: 06-01-2013, 10:14 PM
  4. Replies: 4
    Last Post: 05-31-2013, 06:41 PM
  5. Mowing 1992 John Deere 755 PTO will not engage.
    By dbax10 in forum John Deere Owning/Operating
    Replies: 5
    Last Post: 05-18-2013, 10:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.