Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Jul 2014
    Posts
    2
    Location
    Huntsville, Al
    Tractor
    Belarus 250 as

    Default Belarus 250 final drive housing

    I have a Belarus 250AS . The bolts, actually studs, on the right rear axle housing(where you can adjust the tractor height) are sheared off.
    I need to know the correct procedure to take this apart to repair the holes or replace the housing.
    The axle comes out about 1 to 2 inches & it acts like there is something holding it. Brake Bands maybe?
    I'm afraid to pull it all the way out as it probably goes into the spline in the planetary gears in the transmission.
    Can I leave the axle in place & just dismantle the final drive housing?
    A good service manual would be a blessing. I would appreciate any help.

  2. #2
    New Member
    Join Date
    Apr 2012
    Posts
    18
    Location
    Northen Michigan
    Tractor
    John Deere

    Default Re: Belarus 250 final drive housing

    Rebranger, did you get anywhere with your project? My neighbor owns the same tractor with the same problem and we're trying to fix it. Your axle has to come out with the brake attached, then you can dismantle the final drive and repair the studs and bolt holes and reassemble. My neighbors brakes were messed up and we broke parts getting it apart, now we're trying to locate parts to reassemble.

  3. #3
    New Member
    Join Date
    Jul 2014
    Posts
    2
    Location
    Huntsville, Al
    Tractor
    Belarus 250 as

    Default Re: Belarus 250 final drive housing

    No, I tried to JB weld the three (3) remaining bolts in place, but they are just barely holding. Now I have a ratchet strap around the housing. I am hesitant to attempt to remove the outer housing, don't have any kind of lift or hoist at the barn.
    I cannot find a tractor shop willing to attempt to repair it. I have tried to locate a dealer, but no luck. There used to be a dealer outside Lawrenceburg, Tn. but they closed years ago.
    I had another, older T-25A, that I sold for $500, @#%!, because I thought the tranny was bad, but turned out, only thing wrong was gear shift was crossed up!!! Still kickin myself!!.

    I think I'll just try to trade it off !

Similar Threads

  1. Belarus 250 AS
    By fritzferris in forum Parts/Repairs
    Replies: 2
    Last Post: 05-23-2014, 04:33 PM
  2. BIL needs a spring for 250 AN Belarus
    By sweettractors in forum All Other Brands
    Replies: 5
    Last Post: 04-05-2011, 11:06 AM
  3. Belarus 250 no power
    By rickde in forum New Member Introductions
    Replies: 23
    Last Post: 04-05-2011, 08:16 AM
  4. Oil & Fuel Diesel pump belarus 250
    By niva in forum All Other Brands
    Replies: 2
    Last Post: 03-28-2011, 01:22 PM
  5. Belarus 250 PTO speed
    By Anonymous Poster in forum Ag Tractors & Machinery
    Replies: 2
    Last Post: 01-10-2002, 01:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.