grinder2
New member
hello i have a l3010 kubota 4wd. it has started to leak oil at the front steering knuckle. anyone ever had to fix one of these . any thoughts would be great thanks
kubota l3010 oil leak
- Thread starter grinder2
- Start date
dangier_VA
Silver Member
Grinder,
If you are still looking for information for your knuckle oil leak, contact Messicks.com. They will give you a parts breakdown sheet and you can order the seal assembly. If your L3010 is anything like my L3130, pretty straightforward in replacing the seal. Just need a couple of good large snap ring pliers as the snap rings are beefy.
Good Luck,
David
PS I put off replacing the seal as I needed the tractor for a job. Added oil the axle for 6 months or so. Just checked it every few days.
If you are still looking for information for your knuckle oil leak, contact Messicks.com. They will give you a parts breakdown sheet and you can order the seal assembly. If your L3010 is anything like my L3130, pretty straightforward in replacing the seal. Just need a couple of good large snap ring pliers as the snap rings are beefy.
Good Luck,
David
PS I put off replacing the seal as I needed the tractor for a job. Added oil the axle for 6 months or so. Just checked it every few days.
varmint
Elite Member
- Joined
- Mar 17, 2003
- Messages
- 2,575
- Location
- Northern Maryland
- Tractor
- Kubota B8200, then a Kubota L3130 HST, now a Kubota L3400 HST
Since the OP is in Canada, maybe he should check with Paul Short for a good dealer to work with... I think Messicks may have issues with shipping parts to Canada, based on earlier posts, if my memory is correct??