Results 1 to 4 of 4
-
01-31-2004, 10:47 AM #1Platinum Member
- Join Date
- Nov 2003
- Posts
- 800
- Location
- Winn Parish, LA
- Tractor
- Case 380B, Super C
Ford loader vave question
Anyone know who made 19-332 (#712) loader control valve (2 spool w/float) for Ford? There is a plug in the 'out' port of valve, but not sure if it can handle backpressure from downstream load. Loader/ pump/controls setup originally came from 400HD and Ford/NH doesn't have info on anything (gpm, relief set,valve mfgs) . Want to plumb 3pt hoe in series with loader. Would be nice to know mfg of front pump also.
Thanks,
Mac
-
01-31-2004, 10:57 AM #2
- Join Date
- Feb 2002
- Posts
- 996
Re: Ford loader vave question
The only information I could come up with was that Ford started using this valve in 1958. I could come up with no brand name.
-
01-31-2004, 04:16 PM #3Platinum Member
- Join Date
- Nov 2003
- Posts
- 800
- Location
- Winn Parish, LA
- Tractor
- Case 380B, Super C
Re: Ford loader vave question
Thanks for effort. Ford/NH dealer didn't know either.
Mac
-
01-31-2004, 04:52 PM #4
- Join Date
- Feb 2002
- Posts
- 996
Re: Ford loader vave question
If I had to guess I would go with prince because we used these a lot on the older ford loader. but again that would just be a guess.
Reply With Quote
