TJ Walls
New member
I don't seem to have any brakes on my 08 ct235. No resistance in the pedal either. Linkage looks good. Any ideas? something stupid I hope?
no brakes on bobcat ct235
- Thread starter TJ Walls
- Start date
SSdoxie
Elite Member
More than likely just need to adjust the linkage on each side. Instructions are in the Operator manual.
Fred Barbour
Silver Member
- Joined
- Oct 16, 2010
- Messages
- 114
- Location
- East Kootenays, British Columbia
- Tractor
- 2009 Bobcat CT 235
TJ;
I have a 09 CT 235 and found that after around 300 hours the brakes no longer would hold when the brake was set. Follow the adjustment instructions and use small increments doing both side the same. Be sure to constantly check to see if you can set the brake because an over adjustment will not allow you to set the brake unless you have the power of an Olympic weightlifter.
Fred
I have a 09 CT 235 and found that after around 300 hours the brakes no longer would hold when the brake was set. Follow the adjustment instructions and use small increments doing both side the same. Be sure to constantly check to see if you can set the brake because an over adjustment will not allow you to set the brake unless you have the power of an Olympic weightlifter.
Fred