Results 1 to 3 of 3
-
02-29-2004, 10:32 AM #1New Member
- Join Date
- Feb 2004
- Posts
- 12
- Location
- south carolina
- Tractor
- ym1802d
3ph problem
i have an 1802d yanmar and after running it for about 15 min. the 3ph quits lowering....it works fine until it gets warm...with my bush hog on it slowly lowers, but with a box blade it will not....cleaned the filter and fluid and still the same problem....any suggestions
-
02-29-2004, 04:48 PM #2Super Member
Rest in Peace
- Join Date
- Mar 2001
- Posts
- 6,033
- Location
- BUFFALO ,NEW YORK AREA
- Tractor
- kubota b2400- R4 tires
Re: 3ph problem
not familar with that tractor, but does it have (like mine) a control for the speed to lowe 3ph implements? if it does u may have it close too much, if i close mine nothing will lower!
-
03-06-2004, 02:05 PM #3Platinum Member
- Join Date
- Dec 2003
- Posts
- 702
- Location
- Virginia
- Tractor
- '04 Branson 3520, '51 Fergy, '96 MTD 18/46, '02 Craftsman GT5000/48
Re: 3ph problem
If the tractor is warm and once you are able to lower the unit, disconect the bush hog and see if it creeps up with the control in the lowering position? [img]/forums/images/graemlins/confused.gif[/img]
Reply With Quote
