Results 1 to 3 of 3
  1. #1

    Default Ford 7\' Sickle mower

    Hey folks, I just purchased a used Ford seven foot sickle mower and the belt is broken. I am attempting to buy a new one but there are no visible part numbers on this sickle. The only numers found are B243139 which is on a metal tab hanging from a piece of wire and 60401 on the main frame assembly. Ford NewHolland says neither are a part number. Any ideas where a number might be.
    Thanks for the help Rich

  2. #2
    Veteran Member
    Join Date
    Jul 2003
    Posts
    1,689
    Location
    Central VA, USA
    Tractor
    Mahindra 6000 MWFD, 2 1950's Farmalls, 1974 Farmall 140, 1967 Mf 135Delux

    Default Re: Ford 7\' Sickle mower

    I assume you have the belt....take it with you to the dealer/parts outlet. Also if you have a digital camera, take a picture of the mower and take it also. They should be able to set you up with either or both. BobG in VA

  3. #3

    Default Re: Ford 7\' Sickle mower

    also measure the main drive pulley on the mower it will determine which belt you need. They measure from 9-12.5 inches in diameter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.