Kubota L4610 Power Beyond port

   / Kubota L4610 Power Beyond port #1  

jedens

Bronze Member
Joined
Jun 5, 2001
Messages
97
Location
La Veta, CO
Tractor
Kubota 4610
I've lost my manual for my tractor. I want to get a hydraulic port selector to put on my power beyond port. Is that port a 1/2" or 3/4" port? Thanks for the help!
 
   / Kubota L4610 Power Beyond port #2  
</font><font color="blue" class="small">( I've lost my manual for my tractor. I want to get a hydraulic port selector to put on my power beyond port. Is that port a 1/2" or 3/4" port? Thanks for the help! )</font>

Unsure of what you are trying to do. Power beyond typically feeds the pump
port of a downstream valve in a static configuration.

If it is a Husco series 5000 sectional valve the power beyond port is either
SAE10 or SAE12 ORB depending on whatever option Kubota chose.
 
   / Kubota L4610 Power Beyond port #3  
On a 3710 it's a Husco valve- power beyond port is 1/2" it takes a straight thread o-ring type fitting

Also note that hydraulic circut can be taped at rear right side of case- you will see a triangle shape cover block-this is where the kubota remotes bolt on- on gearmore top and tilt kit they just made a alluminum block drilled for oil passage and fittings and bolt it on where the triangle block was, return is connected to a nearby hole that has a rubber plug in it
 
 
Top