Results 1 to 2 of 2
  1. #1
    Veteran Member
    Join Date
    Jul 2003
    Posts
    1,691
    Location
    SW Indiana
    Tractor
    Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST

    Default replacement scarfiers

    Over the years I've managed to bend and twist several of the scarfiers on my United box blade enough so that the depths are different. I bought this from a very small dealer who is long gone. Does anyone have a link for the manufacturer? The shank is 3/4 by 2 1/2 inches with 3 centered holes on the 2 1/2 width. Are these standard scarfiers I could by somewhere else?

    John

  2. #2
    Veteran Member
    Join Date
    Jul 2003
    Posts
    1,168
    Location
    New Hebron, MS
    Tractor
    MF 1455v 4wd, 1040FEL

    Default Re: replacement scarfiers

    Many welding shops, machine shops, and other places similar have hydraulic presses that can bend these back into shape easily. I've had a few that required some work that only took a few minutes. I don't think you need to replace them unless they are worn down?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.