Results 1 to 2 of 2
  1. #1

    Default Kubota 2250 Fluid leak

    I have a 1987 kubota 2250 with 418 hours. Recently I noticed a small drop of oil coming out of a brass bolt on the bottom of the transmission. The bolt is directly behind the oil pan and has a metal pin in the middle that slides freely up and down. The oil leaks out of this area. What problem and how do I fix?

    Thanks.

  2. #2
    Platinum Member joecdeere's Avatar
    Join Date
    Apr 2002
    Posts
    938
    Location
    Cumming,Georgia
    Tractor
    1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB

    Default Re: Kubota 2250 Fluid leak

    That is there to allow two things, engine oil that is leaking from the rear main, and / or transmission oil to get out with out getting on the clutch disk and causing slipping. The loose pin is made to shake and vibrate to keep the hole open. A slight drip should keep you checking for low fluid levels, but I'd learn to keep an eye on it if not a lot. All cures will involve splitting the tractor at the least to correct. This is an older tractor and a slight leak is to be expected

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.