Results 1 to 3 of 3
  1. #1

    Join Date
    Sep 2004

    Default Front Axle/Front End Problem Ford 1910

    Pulling a stump in reverse something started skipping in the front end. Well 4 wd you could not use, the left front wheel locks up. So I used 2wd, now the 2wd is locking up.

    should I drop the whole differential off and work on the whole thing? Is that whats probably wrong?

  2. #2
    Platinum Member
    Join Date
    May 2003
    NE PA
    AC 5020, Gravely Com12, JD X300R, WH 16 Auto

    Default Re: Front Axle/Front End Problem Ford 1910

    If it were me I would start by removing the drain plugs on the axle and where I found metal I'd investigate further, might help you pinpoint whether it on one of the ends or in the center.

  3. #3
    Elite Member
    Join Date
    Sep 2003
    New Brunswick, Canada
    Kubota L5030 HSTC, MF 5455, Kubota M120, Allis Chalmers 7010

    Default Re: Front Axle/Front End Problem Ford 1910

    I suspect you are now missing some teeth on your ring gear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.