Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    Platinum Member
    Join Date
    Nov 2003
    Posts
    800
    Location
    Winn Parish, LA
    Tractor
    Case 380B, Super C

    Default Re: check valve IH 3414

    Then you'll have to find # on loader frame and search for parts manual for that loader. Most have details on loader valve. I might could help you, but need model#. I think the 444 was built in GB and is very similar.

  2. #12
    Elite Member
    Join Date
    Jul 2003
    Posts
    3,373
    Location
    Goffs Corner, KY
    Tractor
    IH 2444

    Default Re: check valve IH 3414

    Paul,
    The 444 were built both in GB and the US. Main difference is the electrical, Lucas on the GB built ones and Delco on the us built ones. GB ones have a B as the beginning of the SN and US ones have a U. The 2444 is just industrial versions of AG tractors with foot throttle and HD adjustable front axle. Of course you can get the Low Boy version, with frame mounted back hoe, etc... Parts for the 2444 are not an issue can be picked up at CNH dealer. My loader is a 2050.

    Ben

  3. #13

    Join Date
    Sep 2004
    Posts
    18
    Location
    Pittsburgh,PA
    Tractor
    IH 3414

    Default Re: check valve IH 3414

    I have a dealer very close but dont know if they are willing or able to get me parts. I could use a fuel pump.

  4. #14
    Elite Member
    Join Date
    Jul 2003
    Posts
    3,373
    Location
    Goffs Corner, KY
    Tractor
    IH 2444

    Default Re: check valve IH 3414

    Paul,
    is the fuel pump a round vertical thing on the right side of the engine with the fule bowl just behind it? If so it seems to be the same as mine, can measure it if you want. And you can just get one for a 444 tractor. I have not seen the fuel pumps in any of the aftermarket catalogs. Is yours a c153 gas ? I expect that when mine goes out I will just get a universal one for a carburated auto/truck engine and bolt/plumb it on there.

    One tip, I do not ask for 2444 parts only 444. The CNH dealers tell me it is an industrial backhoe and go to Navistar or someplace hot [img]/forums/images/graemlins/smile.gif[/img] So just figure out which tractor has the same engine and get your engine parts for that model tractor.

    Ben

  5. #15

    Join Date
    Sep 2004
    Posts
    18
    Location
    Pittsburgh,PA
    Tractor
    IH 3414

    Default Re: check valve IH 3414

    The bowl sits on top of the pump, I think it is the same pump as a B414 but Im not sure I have no way to know. Pumps for the B414 are very common but apparently not for the 3414. I have seen pumps on Austrailian and New Zeland sites and repair kits as well but nothing here in the states. I have a gas engine not sure which one.

  6. #16
    Elite Member
    Join Date
    Jul 2003
    Posts
    3,373
    Location
    Goffs Corner, KY
    Tractor
    IH 2444

    Default Re: check valve IH 3414

    I found one reference last night in an old Valu-bilt catalog indicating that the 3414 - had the same engine as the b414 it was listed as a BC144 - gas or BD154 - Diesel. This was in a used parts section they show no new pump for a B414. If it is electric you can always rig something, maybe an inline filter and universal electric pump for a carburated engind. Do not use one for a fuel injected vehicle as the float valve will not handle the pressure.

    Ben

  7. #17

    Join Date
    Sep 2004
    Posts
    18
    Location
    Pittsburgh,PA
    Tractor
    IH 3414

    Default Re: check valve IH 3414

    I considered the electric route also but the fuel pressure is too low. When I put a fuel pressure gauge on it the pressure read 1.5 psi. See what you think of this pump. http://www.gulfsouthequip.com/ih_fuel.htm

  8. #18
    Elite Member
    Join Date
    Jul 2003
    Posts
    3,373
    Location
    Goffs Corner, KY
    Tractor
    IH 2444

    Default Re: check valve IH 3414

    OH so yours is mechanical, now I understand. My 2444 is electric.
    For $35 I would go with it. Gald I am not buying one for a 275 ! WOW.

    Ben

  9. #19

    Join Date
    Sep 2004
    Posts
    18
    Location
    Pittsburgh,PA
    Tractor
    IH 3414

    Default Re: check valve IH 3414

    I guess this pump will fit the 3414 gas??? Paul

  10. #20
    Elite Member
    Join Date
    Jul 2003
    Posts
    3,373
    Location
    Goffs Corner, KY
    Tractor
    IH 2444

    Default Re: check valve IH 3414

    I am not sure if it will fit. Does it look like the one you have ? It says 414 beside it.....It does not look anything like mine on the 2444 which is electric.

    Ben

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.