Results 1 to 4 of 4
  1. #1

    Join Date
    Jan 2005
    Posts
    2

    Default Kubota B6100 ignition switch question

    I broke the key of in my ignition switch, and I was just replacing it with a universal switch and a seperate glow plug button. Anyway, I had 5 terminals on the old switch:
    1) Power in
    2) Start
    3) Run (hour meter, lights, horn)
    4) Glow plug
    5) ???????

    It's a black wire with a white stripe, it has 10 Ohm between it and the ground side of the battery, and I can't for the life of me figure out what it does. Everything seems to work without it hooked up. Any ideas what it is?
    Thanks

  2. #2
    Veteran Member
    Join Date
    Feb 2004
    Posts
    1,906
    Location
    Brazos County Texas 77808
    Tractor
    Kubota L3130HST w/LA723 loader

    Default Re: Kubota B6100 ignition switch question

    When I traded in my B6100E I kept the manuals. If I get time tomorrow I will look to see if there was a schematic in them. I think that there was.

    Vernon

  3. #3

    Join Date
    Jan 2005
    Posts
    2

    Default Re: Kubota B6100 ignition switch question

    The circuits listed on the back of the key switch are 17, 19, 30, 50, AC.
    I can't remember which wire came off which terminal. Hope that helps. Thanks in Advance.

    David

  4. #4

    Join Date
    Apr 2000
    Posts
    236
    Location
    NC
    Tractor
    JD 4100 HST

    Default Re: Kubota B6100 ignition switch question

    I think AC would mean accessory.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.