Results 1 to 4 of 4
  1. #1

    Join Date
    Feb 2005
    Posts
    65
    Location
    Nashville, TN.
    Tractor
    Iseki TL-1900

    Default Tires and Tubes

    Are there any repairs available for a tire with a cut and the tube slightly bulging through the hole? I know with car tires they can put a boot on the inside sometimes.

  2. #2
    Veteran Member
    Join Date
    Dec 2002
    Posts
    1,070
    Location
    Western Washington
    Tractor
    5300 JD 4X4

    Default Re: Tires and Tubes

    I have used that method in the past. I'm sure your local tire shop can fix you up.

  3. #3
    Elite Member
    Join Date
    Mar 2002
    Posts
    3,312

    Default Re: Tires and Tubes

    I'm sure there are. I have seen some really big boots for truck tires.

  4. #4
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    46,396
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Tires and Tubes

    In the past I've seen tractor tires that were laced up with bailing wire on the sidewall.. then had a huge thick boot, or even a section o fthe old tube laid out on the inside, and a new tube.. Ok, for slow moving tractor.. NOT ok for anything going down the highway!

    Soundguy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.