winch Warn 4700

   / winch Warn 4700 #1  

mitchell574

Member
Joined
Dec 12, 2004
Messages
37
Location
jackson co,fl
Tractor
ih 574
I bought this winch from northern about 18 months ago. Now it will not power in. Powers out fine. Power in it just clicks does not move. Drum is free with clutch disingaged. What have I done. I used it to winch truck onto my gooseneck. It worked to load last one. Went to use it again. Nothing
 
   / winch Warn 4700 #2  
Sounds like a bad solenoid. Check the solenoid current. It could also be dirty connections at the solenoid or motor connections.
 
   / winch Warn 4700 #3  
I second the solenoid idea. I have a Warn M8000 that the power in stopped working. I switched the leads to restore the power in so I could finish the job I was doing, then bought 4 new solenoids and made a new control box. The solenoids cost me about $100, The local dealer quoted me around $300 for a new controller. Make sure you get heavy duty solenoids, rated at 100% duty cycle, like the ones used in the power circuits for RV's or large camping trailers.
 
 
Top