Results 1 to 8 of 8
  1. #1
    Veteran Member Jim57's Avatar
    Join Date
    Jul 2005
    Posts
    1,172
    Location
    South Carolina, Westminster - USA
    Tractor
    Shibaura SD2200 4X4

    Default Parts Needed for Lienbach One Row Cultivator

    I am looking for the replaceable plows tips on my Heavy Duty Lienback One Row Cultivator. Here is a link that has a picture of one like mine. I think I have a picture of mine on here but it isn't as good as the one on the following page. It's the second picture down on the right side.

    One Row Cultivator with Extra Heavy Tines

    If anyone has parts for the Lienbach Line please email me or call me.

    bsm357@aol.com

  2. #2
    Member
    Join Date
    Jul 2004
    Posts
    35
    Location
    Loudoun County, Virginia
    Tractor
    Kubota L3400HST/LA463 FEL Kubota T1870 Kubota RTV900

    Default Re: Parts Needed for Lienbach One Row Cultivator

    Jim, have you tried Leinbach themselves?

    Leinbach
    5000 Reynolda Road Winston-Salem N.C. 27106
    9125 Hwy 67 East Bend N.C. 27018
    (336) 924-4115


  3. #3
    Veteran Member Jim57's Avatar
    Join Date
    Jul 2005
    Posts
    1,172
    Location
    South Carolina, Westminster - USA
    Tractor
    Shibaura SD2200 4X4

    Default Re: Parts Needed for Lienbach One Row Cultivator

    </font><font color="blue" class="small">( Jim, have you tried Leinbach themselves?

    Leinbach
    5000 Reynolda Road Winston-Salem N.C. 27106
    9125 Hwy 67 East Bend N.C. 27018
    (336) 924-4115

    )</font>

    I will give them a call tomorrow. I had found their website but unfortunately they were already closed.

    Thank you for the information.

    Jim


  4. #4
    Elite Member RobJ's Avatar
    Join Date
    Jul 2005
    Posts
    3,470
    Location
    Spring, TX (Houston)
    Tractor
    Kubota L2500

    Default Re: Parts Needed for Lienbach One Row Cultivator

    What do you need? most tractor places stock the chisels and such, they are all standard. I;ve seen them at TSC to.

  5. #5
    Veteran Member Jim57's Avatar
    Join Date
    Jul 2005
    Posts
    1,172
    Location
    South Carolina, Westminster - USA
    Tractor
    Shibaura SD2200 4X4

    Default Re: Parts Needed for Lienbach One Row Cultivator

    I was going to replace with as close as I can get to what I have... However, I have found that they make many different ones. I am not sure which would be the best with all the choices. I think I would like some that are universal. Changing them out would be alot of time. I also need the bolts. The two center shanks have worn down to the slot for the bottom bolt. I probably need to replace those as well. This unit was used so I didn't realize that they were worn until now.

    I have priced the two shanks at $13.50 each x's 2 and the standard type of bolt on plows at $5.95 each x's 6. However this is with a trip to Winston, Salem, NC to pick them up.

    That is about an 8 hour trip one way. I will check on shipping and also with other tractor places.

    Jim


  6. #6
    Super Member Inspector507's Avatar
    Join Date
    Mar 2002
    Posts
    5,799
    Location
    Central Ohio

    Default Re: Parts Needed for Lienbach One Row Cultivator

    Jim,
    Have you checked with Agri-Supply ?
    They have a few stores in NC and also mail order.

  7. #7
    Veteran Member Jim57's Avatar
    Join Date
    Jul 2005
    Posts
    1,172
    Location
    South Carolina, Westminster - USA
    Tractor
    Shibaura SD2200 4X4

    Default Re: Parts Needed for Lienbach One Row Cultivator

    </font><font color="blue" class="small">( Jim,
    Have you checked with Agri-Supply ?
    They have a few stores in NC and also mail order. )</font>

    I'll check there. Thank you for the link.

    Jim


  8. #8
    Veteran Member Jim57's Avatar
    Join Date
    Jul 2005
    Posts
    1,172
    Location
    South Carolina, Westminster - USA
    Tractor
    Shibaura SD2200 4X4

    Default Re: Parts Needed for Lienbach One Row Cultivator

    All sweeps replaced with New Ones today on my Lienbach One Row Cultivator. It works much better and I now know what the cultivator should do when it is new. I bought it used and it worked ok but now... It's a very hard working piece of equipment. Thanks for all of your help.

    Jim


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.