Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Sep 2006
    Posts
    2

    Default L1500 Kubota slack/play in the steering

    I found the adjustment on the right side at the base of the steering post just below the fuel tank. Now I am wondering where it gets its lube. I see no zerk fitting. Ia amtold that most part for a 175 will fit the L1500/ Anyone know what lubes the steering gears on a L1500 or a 175? Thanks

  2. #2
    Elite Member RobJ's Avatar
    Join Date
    Jul 2005
    Posts
    3,471
    Location
    Spring, TX (Houston)
    Tractor
    Kubota L2500

    Default Re: L1500 Kubota slack/play in the steering

    Should be 90w gear oil. Let me look.

    Well a picture I have doesn't show much. Basically you fill it like a diff, remove a plug, add oil until it runs out, replace plug. On my 2500 it's .18qts, not much. Manual does show to use UDT or SAE 80, 90w oil. I would stick with 90w, heavier incase the seal is leaking a bit.

    Rob
    L2500

  3. #3
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,343
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: L1500 Kubota slack/play in the steering

    And if the seal really leaks.. try a 0 or 00 pourable grease. Jd cornhead or other similar 'flowable' greases will work good for those applications.. as they slump back down into the cavity after the gear moves..

    Soundguy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.