stray
Platinum Member
- Joined
- Jan 18, 2004
- Messages
- 710
- Location
- east TN
- Tractor
- Power-trac 422 2003 model and 428 January 2015 model
I need to design and build a pond rake. I would like it to extend about 15 feet out from the PT. I think it needs to be 4 feet wide and the teeth about 2 feet deep. I have in mind using 3/8 rod for the teeth. I made a rake I use by hand (some what smaller) it worked well but a lot of work. I have altogether about 4 acres of water (5 ponds). I was wondering if any of you all had any ideas or new of any thing similar one could buy and adapt for this job.