Results 1 to 3 of 3
  1. #1
    Silver Member
    Join Date
    Mar 2004
    Piedmont, OK
    PT - 425

    Default Ignition, Key Switch Question

    The Key switch on my PT-425 Moves. [img]/forums/images/graemlins/frown.gif[/img]
    It will spin when I try to start it or turn it off. [img]/forums/images/graemlins/confused.gif[/img]
    It doesn't move much, maybe 10 or 15 degrees of a 360 degree circle.
    I took the plate off last night and tried to tighten it. [img]/forums/images/graemlins/crazy.gif[/img] It was already tight, to the point that there are no more threads for the nut to tighten into. [img]/forums/images/graemlins/frown.gif[/img]
    Do I need to add a spacer of some sort to allow the nut that holds it tight to have more threads to use? [img]/forums/images/graemlins/confused.gif[/img]
    has anyone else had this problem?
    If so, how did you fix it?
    Thanks in advance for any suggestions. [img]/forums/images/graemlins/smile.gif[/img]

  2. #2
    Elite Member SnowRidge's Avatar
    Join Date
    Jul 2003
    East Tennessee
    Power Trac PT-425 / Branson 3520

    Default Re: Ignition, Key Switch Question

    Sounds like there might be a missing washer that should go between the nut and the panel. Most switches that are designed to panel mount come with one, often in the form of a star washer.

    I don't recall anyone else posting about this problem.

  3. #3
    Platinum Member
    Join Date
    Jan 2004
    east TN
    Power-trac 422 2003 model and 428 January 2015 model

    Default Re: Ignition, Key Switch Question

    Haven't had the problem on the PT but i have seen this before on these switches. Add the spacer or just back it off and slide something under it and tighten it back.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.