rexcramer
Silver Member
I have a 1987 GMC 7000 series dump truck with a two speed rear end. Well yesterday when only slightly stuck I snapped an axle. Now I cant get the axle out on the other side to tear the rear apart.
The axle comes out about 3/4 of an inch and then stops. My only guess is that some material from the other axle is jammed in there somehow preventing the good axle from coming out. I am assuming there is no retaining clip holding the axle in right? When I pull the bolts on the gear assembly and move it the axle moves a little so I know its still in the gears.
Thanks for any tips
The axle comes out about 3/4 of an inch and then stops. My only guess is that some material from the other axle is jammed in there somehow preventing the good axle from coming out. I am assuming there is no retaining clip holding the axle in right? When I pull the bolts on the gear assembly and move it the axle moves a little so I know its still in the gears.
Thanks for any tips