milkman
Elite Member
- Joined
- Sep 22, 2001
- Messages
- 3,629
- Tractor
- BX2200, BCS 735
Wed. the 9th, a friend and I took a little trip and went to Earth Tools, interesting visit. They are about 125 mile trip and was worth the drive. I went there to get a PTO extension and have my clutch looked at because if I got a rock hung in the tiller, the clutch would slip, before the engine would stall before it slipped. I took the clutch pack with me and Joel saw right away that the lining had grease on it from the internal bearing leaking. He took it apart and the sealed bearing had leaked so he replaced the bearing and cleaned the clutch and put it back together. He knows these machines inside out and can do whatever it needs in his sleep. He sure has a lot of inventory and I got to see a lot of the implements that are on his website. They had just uncrated a new 853 and was putting the Lombardi diesel on it, sure is a good looking machine, made me drool.
I have the 40" finish mower and sulky that I don't use much anymore and am working on a swap for a sickle mower. Joel has a guy that wants a finish mower so maybe will know in a few days how the deal will work out.
If you're ever close to their place, sure is worthwile to stop and take a look.
I have the 40" finish mower and sulky that I don't use much anymore and am working on a swap for a sickle mower. Joel has a guy that wants a finish mower so maybe will know in a few days how the deal will work out.
If you're ever close to their place, sure is worthwile to stop and take a look.