Additional Hydraulic ports

   / Additional Hydraulic ports #1  

JimC

Silver Member
Joined
Jul 16, 2002
Messages
203
Location
Seguin, TX
Tractor
Kubota BX2200
Has anyone added a additional hydraulic port to a BX2200.
Looke like it would not be too difficult a project.
Sure would be nice to be able to add things like a log splitter etc to the machine.
 
   / Additional Hydraulic ports #2  
Jim, Search the files. I read it somewhere on here.
I'll try to find it. The guy used BX22 parts.
 
   / Additional Hydraulic ports #4  
Keep us posted if you do. I probably will also. I'm going to build a Caddigger BH for my BX. If you need more part numbers and schematics, you can get them from TractorSmart through links like this one:
<A target="_blank" HREF=http://www.tractorsmart.com/downloads/BX2200D.pdf>http://www.tractorsmart.com/downloads/BX2200D.pdf</A>
 
   / Additional Hydraulic ports #5  
JimC.

It only took me about an hour to install all the parts which included fabricating the brackets that the hard lines are fastened.
 
   / Additional Hydraulic ports #6  
how hard do you think it would be to add to a L3710? Cost for parts?
 
   / Additional Hydraulic ports #7  
MDSteve.

Your L3710 would be a bit more involved and more expensive because you would actually be adding additional Selective Control Valves(SCVs which is better by the way) I think you can add 2 or 3 more valves, but someone who actually has a L3710 could tell you for sure. It's more expensive because of the valves themselves and the extra hard plumbing that goes along with them.
 
 
Top