chazdo2
Bronze Member
does anybody know how to check or change the front differential oil on this tractor?
1982 Ford F-1200 front diferential oil change?
- Thread starter chazdo2
- Start date
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
what's yer manual say about plug locations?
Depmandog
Elite Member
- Joined
- Nov 26, 2010
- Messages
- 2,556
- Location
- Buckner MO, LaPlata MO
- Tractor
- 2005 Kubota L5030 GST; Farmall 706, 756, 806 & 1086
SG, you just copy and paste that reply from the other thread ??
I hear you brother !!!
Depmandog
Elite Member
- Joined
- Nov 26, 2010
- Messages
- 2,556
- Location
- Buckner MO, LaPlata MO
- Tractor
- 2005 Kubota L5030 GST; Farmall 706, 756, 806 & 1086
OP
Sorry for our comments which may have been out of line. I see where you are new member, and previously posted for help locating a manual.
TBN and its members will usually bend over backwards trying to help........I don't know the answer to your question...BUT, I did find an owners manual here:
http://www.ssbtractor.com/tractor_m...or_manual_make=Ford&tractor_manual_model=1200
They also have a service manual ...but it is very pricey.
Hope this helps, and WELCOME to TBN.
Sorry for our comments which may have been out of line. I see where you are new member, and previously posted for help locating a manual.
TBN and its members will usually bend over backwards trying to help........I don't know the answer to your question...BUT, I did find an owners manual here:
http://www.ssbtractor.com/tractor_m...or_manual_make=Ford&tractor_manual_model=1200
They also have a service manual ...but it is very pricey.
Hope this helps, and WELCOME to TBN.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
SG, you just copy and paste that reply from the other thread ??
I hear you brother !!!
I didn't copy and paste.. not aware of another connected thread?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
SG, you just copy and paste that reply from the other thread ??
I hear you brother !!!
i just read his 4 posts. 3 are crosses of this one and a 4th on a jd.
I didn't see where i had already responded to it?
mostly_gas
Super Member
I & T FO-44 shop manual not so pricey and not as much help covers the Ford 1200. It does not show the drain plugs on your model but the 1700 (same vintage) has three drain plugs, center section and the gear reduction housings on each end.