rkncirclec
New member
I have a JD 4610 PowerReverser/Diesel/RearPTO.
When I turn the key, it just clicks, does not start.
Knowns:
a) Starter Motor and engine work (we jumped the starter and fired right up); died in gear
b) Battery charged.
c) Plenty of diesel
Tries:
a) replaced all fuses
b) replaced Diode Blocks
c) replaced starter relay, engine relay and neutral relay
d) replaced transmission switch
e) replaced rusty seat switch
Flowing Cranking Circuit operation page 150 in tech manual.
She's stuck out in the pasture; don't dare getting my truck stuck to get'r back in.
Any tips on next steps would be appreciated. It still feels like an interlock issue.
Thanks
Ben
When I turn the key, it just clicks, does not start.
Knowns:
a) Starter Motor and engine work (we jumped the starter and fired right up); died in gear
b) Battery charged.
c) Plenty of diesel
Tries:
a) replaced all fuses
b) replaced Diode Blocks
c) replaced starter relay, engine relay and neutral relay
d) replaced transmission switch
e) replaced rusty seat switch
Flowing Cranking Circuit operation page 150 in tech manual.
She's stuck out in the pasture; don't dare getting my truck stuck to get'r back in.
Any tips on next steps would be appreciated. It still feels like an interlock issue.
Thanks
Ben
Last edited: