tduncklee
New member
Today I had to replace the main hydraulic supply hose under the loader valve. A while later (maybe an hour or so) the backhoe hydraulics were slow and weak. The loader is fine. Fast and strong.
When operating a control, say raising the boom with a load in the bucket, the dipper drifts down and the swing drifts to the left. The drift is quite fast. If I release the boom control, the dipper and swing drift stops. I imagine I got some crud in the system but would like some advice as to where I should start.
Thanks for any advice!
TD
When operating a control, say raising the boom with a load in the bucket, the dipper drifts down and the swing drifts to the left. The drift is quite fast. If I release the boom control, the dipper and swing drift stops. I imagine I got some crud in the system but would like some advice as to where I should start.
Thanks for any advice!
TD